Abrasion-resistant steel

Designed to last

YEAR AFTER YEAR

The HS 500 category is for steel with a nominal hardness of 500 BHN, designed for more demanding wear applications. Engineering specifications sometimes refer to steel in this category as AR 500. A balanced combination of chemistry, welding, forming and impact values results in a heavy-duty wear plate that exhibits both hardness and strength. HS 500 is an optimal solution for mining, transportation, forestry and construction applications.

L’AlgoTuf 500 est conçu pour les applications qui nécessitent une résistance à l’abrasion extrêmement élevée. Fabriqué par Algoma Steel au Canada, ce matériau de 500 HBW est un produit bien connu…..
DILLIDUR 500 est un acier résistant à l’usure d’une dureté de Brinell nominale de 500 HBW dans des conditions de livraison départ-usine. Fabriqué en Allemagne par Dillinger, DILLIDUR 500 est utilisé lorsqu’une……
DILLIDUR 500T is specially designed to have a constant through thickness hardness. The minimum hardness throughout the plate cross section is at least 90% of the minimum surface hardness…
Available as a heavy plate or sheet product, durostat 500 is suited to applications with high mechanical stress and high levels of abrasion. Made in Austria by voestalpine, durostat 500 is suitable…
HSPP introduced the first light gauge “high hard” boron steel sheet to North America in 1985. Made in Sweden by Swebor, and originally known as SB-50, Hardbor 500 has become a time-tested…

Download pdf >

Hardox 500 is an abrasion-resistant steel with a nominal hardness of 500 HBW. Typical applications are components and structures subject to wear. Hardox 500 is available in thicknesses of 4.0…
Made in the USA by Cleveland-Cliffs, HARDWEAR 500F is an abrasion-resistant steel with a nominal hardness of 500 BHN produced in Coatesville and Conshohocken, PA., and Burns Harbor…
JFE EH-C500 is an abrasion-resistant steel manufactured for non-structural applications where the average target value of surface hardness is 500 BHN. EH stands for EVERHARD. Made in…
NUHEAT 500F is an abrasion-resistant plate product with a nominal hardness of 500 BHN.  Made in the USA by Nucor, NUHEAT 500F is designed for service applications that require both wear…
Made in Belgium by NLMK Clabecq, Quard 500 is a martensitic abrasion-resistant steels, with an average hardness of 500 HBW. Its high resistance to abrasive wear and impact is suitable for..
SWEBOR 500 is designed for extra-heavy wear applications needing great strength and good weldability, where thin plate is required and weight saving is important. Made in Sweden by Swebor…
XCHD 500 is a wear resistant steel product with a nominal hardness of 500 HBW. HSPP orders XCHD 500 to a restricted flatness tolerance, as well as shot blasted and primed with Hempatex…