HIGH-STRENGTH STEEL

YOUR NEXT PROJECT

HSPP stocks high-quality, high strength steel plates for use in a variety of industries. Our high-strength structural steel products offer high yield and tensile strength, as well as excellent notch toughness, with reported Charpy V-notch impact results available in most cases. While we focus on the higher end of structural yield requirements, we also carry commodity mild steel plates to round-out your one-stop list for profile cut and processed parts and kits.

A514

A514 is the primary quenched and tempered engineering specification for steels having a minimum yield strength of 100,000 psi (690 MPa) in base thicknesses…

Download pdf >

Algoma 100

Made in Sault-Ste-Marie, Ontario, Canada by Algoma Steel, Algoma 100 is suitable for applications which require high strength with superior weldability…

Download pdf >

Algoma 130

Made by Algoma Steel in Canada, Algoma 130 is a higher strength version of Algoma 100, with minimum yield strength of 130 ksi and reported impacts at -40C (-40F)…

Download pdf >

alform 700ME

Made in Austria by voestalpine, thermo-mechanically rolled alform steels have a low-carbon, fine grained microstructure. These steels are suitable for cold-forming..

Download pdf >

alform 700M

Made in Austria by voestalpine, thermo-mechanically rolled alform steels have a low-carbon, fine grained microstructure.

Download pdf >

DILLIMAX 690T

DILLIMAX 690T is a tough grade, high strength quenched and tempered, fine grained structural steel, with a minimum yield strength of 690 MPa (100 ksi)…

Download pdf >

DILLIMAX 890T

DILLIMAX 890 is a high strength quenched and tempered, fine grained structural steel with a minimum yield strength of 890 MPa (130 ksi) (referring to the lowest thickness range up to 2”) and…

Download pdf >

HS 44W/50W/50WT

44W/50W/50WT are commodity mild steels under the Canadian engineering specification CSA G40.21. These grades are sometimes known by their metric equivalents 300W/350W/350WT…

Download pdf >

ST 100XF (TL)

ST 100XF by SSAB is a low-carbon, thermo-mechanical controlled-rolled steel that has been developed for applications where increased strength-to-weight ratios are required. Rolled in the USA…

Download pdf >

Strenx 100

Strenx 100 is a structural steel with a minimum yield strength of 100 ksi made by SSAB. Strenx 100 meets the requirements of ASTM A514 Grade S…

Download pdf >

Strenx 100XF

Strenx 100XF by SSAB is a thermo-mechanically rolled product with a minimum yield strength of 100 ksi available as a cut-to-length plate…

Download pdf >

Strenx 700

Strenx 700 by SSAB is a general structural steel with a minimum yield strength of 650 – 700 MPa depending on thickness. Strenx 700 meets the requirements…

Download pdf >

Quend 700

Made in Belgium by NLMK Clabecq, Quend 700 is an extra high strength structural steel produced as quenched and tempered with a minimum yield strength of 700 MPa. Quend 700 complies…

Download pdf >

Quend 900

Made in Belgium by NLMK Clabecq, Quend 900 is extra high strength structural steel produced as quenched and tempered with a minimum yield strength of 900 MPa. Quend 900…

Download pdf >

STRONGER TOGETHER

We believe passionately in the spirit of collaboration. Every innovation and solution we develop is the result of working shoulder-to-shoulder with our clients. Find out how we can help answer your next challenge or engineering problem today.

Search

QUALITY STANDARDS

Conversions Calculators

Weight calculators

Miscellaneous calculators

HIGH-STRENGTH STEEL

WE WOULD BE HONOURED TO SUPPORT

YOUR NEXT PROJECT

WE’RE

STRONGER TOGETHER

MISSISSAUGA

SUDBURY

THOROLD