Abrasion-resistant steel

Designed to last

YEAR AFTER YEAR

The HS 400 category is for steel with a nominal hardness of 400 BHN, designed for moderate wear applications. Engineering specifications sometimes refer to this steel as AR 400 or 400F (where the “F” traditionally stood for “formable”, although all HS 400 is formable today). Its balanced combination of chemistry, welding, forming and impact values results in a versatile wear plate that exhibits both hardness and strength. HS 400 steel is a standard solution for mining, transportation, forestry and construction applications.

Made by Algoma Steel in Canada, AlgoTuf 400F is designed to provide a good level of abrasion resistance plus improved formability and weldability. AlgoTuf 400F has a bare surface condition…
DILLIDUR 400 is a wear resistant steel with a nominal hardness of 400 HBW in delivery condition ex works. Made in Germany by Dillinger, DILLIDUR 400 is used where elevated resistance to…
Available as a heavy plate or sheet product, durostat 400 is suited to applications with high mechanical stress and high levels of abrasion. Made in Austria by voestalpine, durostat 400 is suitable…
Hardox 400 is an abrasion-resistant steel with a nominal hardness of 400 HBW. Typical applications are components and structures subject to wear. Hardox 400 is made in the USA, Sweden…
Made in the USA by Cleveland-Cliffs, HARDWEAR 400F is an abrasion-resistant steel with a nominal hardness of 400 BHN produced in Coatesville and Conshohocken, PA., and Burns Harbor…
JFE EH-C400 is an abrasion-resistant steel manufactured for non-structural applications where the average target value of surface hardness is 400 BHN. EH stands for EVERHARD.  Made in…
NUHEAT 400F is an abrasion-resistant plate product with a nominal hardness of 400 BHN.  Made in the USA by Nucor, NUHEAT 400F is designed for service applications that require both wear…
Made in Belgium by NLMK Clabecq, Quard 400 is a martensitic abrasion-resistant steel with an average hardness of 400 HBW. Exhibiting high toughness, good cold formability and excellent…
SSAB AR400F is a through-hardened, abrasion-resistant plate with a nominal hardness of 400 HBW. AR400F is supplied in the quenched and tempered or as-quenched condition. AR400F is…
XCHD 400 is a wear resistant steel product with a nominal hardness of 400 HBW. HSPP orders XCHD 400 to a restricted flatness tolerance, as well as shot blasted and primed with Hempatex…